Categories
New products
-
RX Ring Joint Gasket
Get verified list of RX Ring Joint Gasket, RX Ring Joint Gasket manufacturers, suppliers and exporters. These RX Ring Joint Gasket manufacturing companies provide high quality products as per your requirement.
-
BX Ring Joint Gasket
Get verified list of BX Ring Joint Gasket, BX Ring Joint Gasket manufacturers, suppliers and exporters. These BX Ring Joint Gasket manufacturing companies provide high quality products as per your requirement.
-
Lens Ring Joint Gasket
Get verified list of Lens Ring Joint Gasket, Lens Ring Joint Gasket manufacturers, suppliers and exporters. These Lens Ring Joint Gasket manufacturing companies provide high quality products as per your requirement.
-
Double Jacket Gasket
Get verified list of Double Jacket Gasket, Double Jacket Gasket manufacturers, suppliers and exporters. These Double Jacket Gasket manufacturing companies provide high quality products as per your requirement.
-
Corrugated Gaskets
Get verified list of Corrugated Gaskets, Corrugated Gaskets manufacturers, suppliers and exporters. These Corrugated Gaskets manufacturing companies provide high quality products as per your requirement.
-
Constant seating stress gaskets
The constant seating stress gasket consists of two components; a solid carrier ring of a suitable material, such as stainless steel, and two sealing elements of some compressible material installed within two opposing channels, one channel on either side of the carrier ring.
-
Spiral-wound gaskets
Spiral-wound gaskets comprise a mix of metallic and filler material. Generally, the gasket has a metal (normally carbon rich or stainless steel) wound outwards in a circular spiral (other shapes are possible) with the filler material (generally a flexible graphite) wound in the same manner but starting from the opposing side.
-
Solid material gaskets
The idea behind solid material is to use metals which cannot be punched out of sheets but are still cheap to produce. These gaskets generally have a much higher level of quality control than sheet gaskets and generally can withstand much higher temperatures and pressures.
-
Sheet gaskets
The premise is simple in that a sheet of material has the gasket shape "punched out" of it. This leads to a very crude, fast and cheap gasket. In previous times the material was compressed asbestos, but in modern times a fibrous material such as high temp graphite is used.
-
Gasket Properties
Gaskets are normally made from a flat material, a sheet such as paper, rubber, silicone, metal, cork, felt, neoprene, nitrile rubber, fiberglass, polytetrafluoroethylene (otherwise known as PTFE or Teflon) or a plastic polymer (such as polychlorotrifluoroethylene).
-
Gasket
A gasket is a mechanical seal which fills the space between two or more mating surfaces, generally to prevent leakage from or into the joined objects while under compression.